Let Your Face Mask Say It For You
So Sleepy Joe Biden has put the Obama’s former Surgeon General in charge of his Corona Virus Task Force, and it is certain to contain many of the original Obamacare Constructers, like Rham ‘Tiny Dancer’ Emanuael’s brother Zeke. You’ll maybe recall that his part of Obamacare was the portion where your life was graded to determine if you were worthy of further life saving medical attention. He’s currently calling for the new Vaccines ( which Trump had put in the FAST lanes – but Biden now tak...
I'm looking for a working old school bottle cooler to hold longneck beer bottles. Prefer to trade something I have, but will consider cash for the right deal. Not so much looking to pay for the name in the cooler than I am for function and Nostalgia. So it doesn't have to be a Collectible brand.
TUBE CHASSIS DRAG CAR $30K as Roller $40K as Turnkey
No Passes Since Restoration. Perfect For “No Prep”
This car is currently in “Turn Key” form, and I have about $70K in building this car, but all of the calls I was getting were wanting to put their own drive train in, so I’ll pull the engine and transmission and sell ready for your drive train. I’ll leave all electronics including the ignition box. I’ll leave the radiator. All I’ll take is the motor, transmission, torque converter and Flex plate.
This car features:
Used (normal wear)
While I had the transmission out, I decided to replace the CSR carbon fiber trans shield and offering this one for sale.
First the not so good
It is expired, but in 20 years I’ve never had a tech inspector climb under the car and look at the label. It’s missing one bolt hole insert, that’s a Lowe’s hardware fix. Part of the strap is melted for not being properly tie wrapped. Not enough to affect integrity- but buy some webbing from Amazon and fix if you wish. My shop rat appears to have lost the two little...
I'm 99.999999% sure this is brand new, but I'll call it used in case the buyer puts under a neutron microscope and wants to argue over it. I'm cleaning out my spare parts bins of stuff I'll never use and listing cheap at OldHippiesAds.
Last I'd checked, Jegs sells the elements under their brand name. I'd buy a dozen in case they stop making. I'm selling cheap at $15 - but if you can't pick up at my shop in Beasley, TX - it's another $20 to ship in a Medium Priority Mail box since they jacked up their prices again.
Automotive A2000 350gph Fuel Pump #1 - Used and working
200.00 Dollar US$
October 30, 2020
This pump was only on one of my 1000hp drag cars for a season before I replaced it with a fuel pump I was being sponsored to run. This pump worked flawlessly when removed and stored.
$20 flat rate shipping or pickup at my shop in Beasley Texas
This is a hitch I pulled off a 78 Dodge Diplomat Coupe. It should direct fit many Mopars of that era, and should be easily modified to fit most American cars and Pickups from the 50s-80s.
No shipping as it would cost twice the price of the hitch to ship. Can be picked up weekdays 8-3:30 at my shop in Beasley, TX (40 miles SW of downtown Houston).
These bolted to the wheels of 1981-83 Imperial, and wire-wheeled hub caps are attached to them with a Long machine screw. This ensured the hub caps staying onto the wheel. I took these off an 81 Imperial I restified.
Ick up at my shop in Beasley, TX - or I pack & ship Priority mail for an additional $20.
15" Wire Spoke Hubcaps With Tethers - Excellent Condition
300.00 Dollar US$
October 30, 2020
This is a full set of wire rim hub caps which were options on 1971-1978 High End Mopars. They give the appearance of the wire spoke wheels. These were taken off a 1978 Diplomat in 1979 (before they had a single scratch) and put into storage for the last 41 years.
No Dents or scratches. Singles in this condition pop up in the range of $85-$125 each - but near impossible to find a full set where all are nice.
In addition to the 1971-1978 luxury Mopars they could be ordered for - they look real nice on virtually any make as ...
These black leather power seats were from a near new totaled BMW 3-series Coupe. I was going to put in my Dodge Magnum, but went a different route.
I paid $1800 + shipping for them - but have no use and will quick sell for $1200.
They make an excellent comfort and appearance upgrade to any Muscle Car with black interior. Leather dye companies sell leather gloss, which permanently adjusts the gloss for the 60s & 70s style if interior.
Price is for pick up at my shop in Beasley Texas. I've wrapped in plastic wrap. If y...
About 20 years ago I swapped this out of my 24K mile 81 Imperial and swapped in an 8.75. I've had it in my shed ever since. I want to say I'd just done a brake job just before I pulled it.
If you have a Mopar A, F, M or J-Body with a 7.25" Axle - this would be a great upgrade. Also can be part of a Rat Rod build or even a homemade trailer.
F/J/M axles are 53.34" wide flange to flange, perches 44.46.
I can't ship, so it will need to be picked up at my shop in Beasley, TX. (40 miles SW of downtown Houston. I've had good luc...
8.75" pulled from a 1960 Plymouth Fury. The 3rd member is a 657 - similar to 742. 60.625" backing plate to backing plate and 45.5" perch to perch.
One legged with a highway gear. Performed flawlessly when pulled.
It can be picked up weekdays 8:30-3:30 from my shop in Beasley Texas. If you need shipped - I suggest getting a bid from Uship.com
Front Bumper from 1960 Plymouth. Missing the optional top, and so the mounting holes for it will need to be filled if you don't have one to mount. Bumper is incredibly straight except for a small dent needing to be hammered out.
Selling cheap for $250
Cannot ship. I've been screwed every time I've shipped bumpers. I suggest getting a bid from Uship.com. If you are flexible on how quick you need it - someone going from my area to yours will give you a better price to pickup at my shop (weekdays 8am-3:30pm) and deliver to y...
This is a Stepthtough scooter frame and fork from a late 40s/early 50s Cushman. I have glass blasted it to bare metal and then sprayed a gallon of high build/sandable primer. More goal is to Kustomize with a Vanguard electric start motor, comet clutch and kustom sheet metal with rear fin from a 60 Plymouth. However, I have many other projects in front of it, so if someone buys, I’ll prepare another frame I have.
Pick up at my shop in Beasley, TX or go to U-Ship.com for a quote
Part of a lot of 12 Cushmans I bought from a man in Illinois. He'd bought it in the 70s, but not started in years. It does turn over, I've not yet had time to get to it. I'll sell for $2900 prior to having time to restore. It appears to be 100% complete, and one of the more rare Eagles.
The title is missing, but they're no way the big deal some make them out to be. I've used International Title or Broadway Title dozens of tines painlessly.
First year of the Truckster, as identified by the cross creases on the front and tailgate of the bed. Three Speed Transmission. Starts easy. Runs and drives well. Real easy restoration can make this historically significant Truckster quite valuable.
Can be seen at my shop in Beasley, Texas Weekdays between 8:30-3:30.
SALE PENDING FUNDING
Montgomery Wards contracted with the Hawk Tooling & Engineering Company of Clarkston, Mi to build a step through scooter to be sold exclusively through their catalog. The Motors were Continental 5hp, and they rode on 20" wheels, which were much taller than the typical Scooters of the period. Very few were made and Montgomery Wards cancelled the contract after a couple of years because Hawk couldn't gear up for the demand.
I bought this scooter as part of a lot of 12 from a man in Illinois. He'd st...
I bought a lot of 12 Cushman Scooters off and old man who bought them one by one in the 70s and 80s and putting in storage - promising himself he'd get around to restoring someday. There were a couple that I wanted, but he was selling only as a lot. I'm pricing these for a quick sale - and will restore and sell what I don't sell as time goes on.
This particular scooter is a 58 Eagle, which had the big (later Model) Silver Eagle Motor and transmission transplanted in it. The bike looks to be complete and restorable.
* 15-100 acres
* Off a FM Rd, or 2-lane road just off FM Rd., not major road
* Accessible by 45' motorhome. No super tight turns, single lane or low branches
* At least 3 of the acres of flat are with no flooding and good drainage
* GREAT VIEW is a must. Must have a view of hills and or valleys
* Fishing Water for Grand Kids. River or lake access, large clear pond, large spring fed creek
* Access to electricity
* Prefer the Bandera, San Marcos, Luckenbach, areas.
Here's what I need it Suitable for. I hav...
Virgin Mopar Aftermarket Block with 4.49 Rough Bore Wanted
Check with seller
September 16, 2020
Looking for an aftermarket Iron or Aluminum Mopar Wedge RB block with a rough bore of 4.49, which is in new condition. If you have one you want to sell, email me photos, including the cylinders, and information on the block.
Cushman Pacemaker/Road King or Allstate Jetsweep Rear End Cap Wanted
Check with seller
September 14, 2020
I'm looking for the rear cap where the back license plate goes, and the piece above it for Cushman Pacemaker, Cushman Road King, or Allstate Jetsweep.
If you have one to sell, please email me photos and the price you're selling for to firstname.lastname@example.org
This is a mostly complete very rare Sears Allstate Jetsweep, which essentially is a Cushman Pacemaker rebadged to be sold in Sears. Chassis and Matching engine are there, but a couple of pieces of sheet metal from the back of bike will be needed.
This bike is part of a 12 Scooter lot I purchased, which also included the virtually identical (but less rare) Cushman Pacemaker in the same condition. I'm restoring the Pacemaker for me and selling the Jetsweep.
I don't really don't know that much about the scooter. The engine tu...
I pulled this engine out of my 1981 Imperial in 1989 because the EFI was troublesome. I replaced it with a 380hp 360ci Mopar crate motor. This engine had 24000 miles when pulled, but has been sitting in a shed for 31 years. Don't expect to just drop it into a car and go. it should be completely gone through and freshened up. I'm selling dirt cheap for the 1st $250 cash - including the crate with wheels its mounted to.
1957 Jato Walker Executive Gas Powered Golf Cart For Sale
7500.00 Dollar US$
July 30, 2020
Kansas farmer and inventor Max Walker developed the first production gasoline-powered golf carts in 1957 after growing frustrated by electric carts with batteries that often failed to last an entire round of play. Walker designed a relatively simple tubular chassis with three-wheels and a rear-mounted eight-horsepower four-cycle Kohler engine. He included tiller steering and conjoined controls so it could be driven from either seat, and a tilt-up body for easy access to the mechanical bits. But what set the Walker Executive ...
I bought this as part of a three Cushman lot that included a Golfster 735 Shark Nose and a Series 60 step through scooter. I really wanted the Sharknose and the Step-through for pit vehicles at the track and figured I'd flip this Eagle.
Video of it running: https://youtu.be/Uww5jb-vlZw
Very unique Rat Scooter, affectionately known is Frankenstein, built on a Cushman Eagle frame with a military 4-Cylinder motor. I bought off an 85-year-old Cushman collector who built it.
We just got it running after a couple years of sitting. I had it up to 40, with a lot more left, but it has a slightly bent front wheel. The Old man claims he had it to 70. It might do that, but requires a little tuning first.
I have some other things needing my attention right now, so I...