Parts - Mopar

All
Users
Company

Sort by: Newly listed | Lower price first | Higher price first

NEW McLeon Steel 11" Mopar RB Flywheel

275.00 Dollar US$

 May 30, 2020

 Beasley

NEW McLeon Steel 11" Mopar RB Flywheel
Premium

My screwup is your savings. New 11” 30# 143 tooth steel 6-bolt flywheel for Mopar RB. I ordered this based on information given to me, but needed a 130 tooth. Summit sells for $344, plus tax, plus handling, plus heavy shipping. You can have this one for $275 and I’ll pay for the ride on the lower 48.

Read more

NOS Edelbrock STR14 Intake Manifold W/ Cross Ram L...

2000.00 Dollar US$

 May 30, 2020

 Beasley

NOS Edelbrock STR14 Intake Manifold W/ Cross Ram Lid
Premium

Made of pure Unobtainium! Made for 413/426/440 Mopar Wedges - RB blocks You'll never see another new STR-14. This Intake spent decades hanging on a shop wall. If you're putting a Mopar RB motor in a Hot Rod, go retro with this intake and a pair of 4-barrels - and you'll be the hit of any car show. I'll be a sport and pay for the ride.

Read more

Tilt/Cruise Late B Body Steering Column

175.00 Dollar US$

 May 30, 2020

 Beasley

Tilt/Cruise Late B Body Steering Column
Premium

I pulled from my 78 Magnum when I converted to floor shift. I'm pretty sure they shared the Saginaw column with GM for tilt. If you're looking to add tilt to your Mopar or GM, this ought to be pretty easy to swap in. Comes with key lock $175 + $75 to pack & ship in lower 48

Read more

Fender Skirts 1960 Plymouth

200.00 Dollar US$

 February 8, 2021

 Beasley

Fender Skirts 1960 Plymouth

Came off a 1960 Plymouth Belvedere 2 Dr hardtop. As you can see in detailed photos, there's a little surface little surface flash, but nothing deep or serious. Wouldn't take any more than to strip and hit with a couple of coats high build primer to make smooth. Pick up at my shop in Beasley, Texas - or $40 to box up at ship as they're pretty heavy.

Read more

Horn Center Ring For 1960 Plymouth

50.00 Dollar US$

 February 8, 2021

 Beasley

Horn Center Ring For 1960 Plymouth

Can be polished to look good for your average driver, but would need to be rechromed for a show car. $25 to ship in lower 48 or pick up at my shop in Beasley, TX.

Read more

Six Mopar Starter Motors from 60s-70s

100.00 Dollar US$

 January 20, 2021

 Beasley

Six Mopar Starter Motors from 60s-70s

I'm betting most, if not all work. Over the last 25 years I'd swap to mini motors as I bought Mopar Muscle cars and would put headers on. That said -- they're being sold as cores. Clean, Test, repair if needed and make some extra scratch. Can be picked up at my shop in Beasley, Texas (1 mile off I-69/Southwest Freeway Beasley exit) weekdays 8-4. If this ad is up - I still have them. do NOT contact me with unsolicited services...

Read more

Zoom 180078

100.00 Dollar US$

 January 5, 2021

 Beasley

Zoom 180078

going through decades of parts stowed away in bins in my shop, I came across a box labeled Zoom 180078. A search doesn't come up with that part number, so its most likely an obsolete part - no longer made. I did find a 180073 - which is a less steep gear that is for a Dana 60. Inside is a gear set with the ring gear slightly larger than a Ford 9" It's 9.50" on the Gear side and 9.125" on the bolt side, which pretty much guara...

Read more

2bbl Intake Manifold Mopar SM

10.00 Dollar US$

 January 5, 2021

 Beasley

2bbl Intake Manifold Mopar SM

Taken off a 78 Dodge Magnum 360 when I replaced with an aluminum 4bbl. Yours for about what its worth as scrap iron. No shipping, pick up in Beasley Texas.

Read more

Pair of Hub Cap Saver for 1981-83 Imperial

30.00 Dollar US$

 October 30, 2020

 Beasley

Pair of Hub Cap Saver for 1981-83 Imperial

These bolted to the wheels of 1981-83 Imperial, and wire-wheeled hub caps are attached to them with a Long machine screw. This ensured the hub caps staying onto the wheel. I took these off an 81 Imperial I restified. Ick up at my shop in Beasley, TX - or I pack & ship Priority mail for an additional $20.

Read more

8.25" Rear Axle from 24K Mile 81 Imperial

250.00 Dollar US$

 October 15, 2020

 Beasley

8.25" Rear Axle from 24K Mile 81 Imperial

About 20 years ago I swapped this out of my 24K mile 81 Imperial and swapped in an 8.75. I've had it in my shed ever since. I want to say I'd just done a brake job just before I pulled it. If you have a Mopar A, F, M or J-Body with a 7.25" Axle - this would be a great upgrade. Also can be part of a Rat Rod build or even a homemade trailer. F/J/M axles are 53.34" wide flange to flange, perches 44.46. I can't ship, so it will...

Read more

8.75" rear end from 1960 Plymouth

500.00 Dollar US$

 October 14, 2020

 Beasley

8.75" rear end from 1960 Plymouth

8.75" pulled from a 1960 Plymouth Fury. The 3rd member is a 657 - similar to 742. 60.625" backing plate to backing plate and 45.5" perch to perch. One legged with a highway gear. Performed flawlessly when pulled. It can be picked up weekdays 8:30-3:30 from my shop in Beasley Texas. If you need shipped - I suggest getting a bid from Uship.com

Read more

Front Bumper to 1960 Plymouth Fury

250.00 Dollar US$

 October 14, 2020

 Beasley

Front Bumper to 1960 Plymouth Fury

Front Bumper from 1960 Plymouth. Missing the optional top, and so the mounting holes for it will need to be filled if you don't have one to mount. Bumper is incredibly straight except for a small dent needing to be hammered out. Selling cheap for $250 Cannot ship. I've been screwed every time I've shipped bumpers. I suggest getting a bid from Uship.com. If you are flexible on how quick you need it - someone going from my ar...

Read more

318 EFI Motor from 1981 Imperial

250.00 Dollar US$

 September 10, 2020

 Beasley

318 EFI Motor from 1981 Imperial

I pulled this engine out of my 1981 Imperial in 1989 because the EFI was troublesome. I replaced it with a 380hp 360ci Mopar crate motor. This engine had 24000 miles when pulled, but has been sitting in a shed for 31 years. Don't expect to just drop it into a car and go. it should be completely gone through and freshened up. I'm selling dirt cheap for the 1st $250 cash - including the crate with wheels its mounted to.

Read more



Subcategories

    search

    Price

    Subscribe to this search