Car/Truck Parts

All
Users
Company

Sort by: Newly listed | Lower price first | Higher price first

15" Wire Spoke Hubcaps With Tethers - Excellent Co...

300.00 Dollar US$

 October 30, 2020

 Beasley

15" Wire Spoke Hubcaps With Tethers - Excellent Condition
Premium

This is a full set of wire rim hub caps which were options on 1971-1978 High End Mopars. They give the appearance of the wire spoke wheels. These were taken off a 1978 Diplomat in 1979 (before they had a single scratch) and put into storage for the last 41 years. No Dents or scratches. Singles in this condition pop up in the range of $85-$125 each - but near impossible to find a full set where all are nice. In addition to t...

Read more

Black Leather Seats for 2dr - Excellent Condition

1200.00 Dollar US$

 October 23, 2020

 Beasley

Black Leather Seats for 2dr - Excellent Condition
Premium

These black leather power seats were from a near new totaled BMW 3-series Coupe. I was going to put in my Dodge Magnum, but went a different route. I paid $1800 + shipping for them - but have no use and will quick sell for $1200. They make an excellent comfort and appearance upgrade to any Muscle Car with black interior. Leather dye companies sell leather gloss, which permanently adjusts the gloss for the 60s & 70s styl...

Read more

Tilt/Cruise Late B Body Steering Column

175.00 Dollar US$

 May 30, 2020

 Beasley

Tilt/Cruise Late B Body Steering Column
Premium

I pulled from my 78 Magnum when I converted to floor shift. I'm pretty sure they shared the Saginaw column with GM for tilt. If you're looking to add tilt to your Mopar or GM, this ought to be pretty easy to swap in. Comes with key lock $175 + $75 to pack & ship in lower 48

Read more

NOS Edelbrock STR14 Intake Manifold W/ Cross Ram L...

2000.00 Dollar US$

 May 30, 2020

 Beasley

NOS Edelbrock STR14 Intake Manifold W/ Cross Ram Lid
Premium

Made of pure Unobtainium! Made for 413/426/440 Mopar Wedges - RB blocks You'll never see another new STR-14. This Intake spent decades hanging on a shop wall. If you're putting a Mopar RB motor in a Hot Rod, go retro with this intake and a pair of 4-barrels - and you'll be the hit of any car show. I'll be a sport and pay for the ride.

Read more

NEW McLeon Steel 11" Mopar RB Flywheel

275.00 Dollar US$

 May 30, 2020

 Beasley

NEW McLeon Steel 11" Mopar RB Flywheel
Premium

My screwup is your savings. New 11” 30# 143 tooth steel 6-bolt flywheel for Mopar RB. I ordered this based on information given to me, but needed a 130 tooth. Summit sells for $344, plus tax, plus handling, plus heavy shipping. You can have this one for $275 and I’ll pay for the ride on the lower 48.

Read more

Rear Decklid 1960 Plymouth

300.00 Dollar US$

 May 30, 2020

 Beasley

Rear Decklid 1960 Plymouth

Solid Rust-free Decklid (Trunk Lid) from a 1960 Plymouth. Should fit all 1960 Plymouths. I can't ship, but many on line shippers will bid to come pick up, wrapping movers blankets and deliver to you. Heights Crating (in Houston) will pick up, crate and ship to anywhere in world, billing your credit card. Check the Transportation section of this site.

Read more

Radiator Core Support 1960-62 Plymouth & Dodge

300.00 Dollar US$

 May 30, 2020

 Beasley

Radiator Core Support 1960-62 Plymouth & Dodge

Might fit other early 60 Mopars This solid and rust free radiator core support was pulled from a Texan 1960 Plymouth. I cleaned it up and primed it, and it is as good as new. I know for a fact it fits all full-size Plymouths and Dodges in 1960-1961, and told it also is same for 1962 Plymouth and Dodge. $350 and I can properly box and ship to anywhere in lower 48 for another $100, or you can pick up in my shop, in Beasley, Tx ...

Read more

Right Side Cordoba Door & Mirror

300.00 Dollar US$

 May 30, 2020

 Beasley

Right Side Cordoba Door & Mirror

This is a rust free South Texas right hand door from a 1979 Cordoba 300. I bought the pair of doors for power window assemblies to put in my 78 Magnum, so window mechanisms will have to be transferred from your old door. The left door has been sold. Pickup at my shop in Beasley (40 miles from Houston) only. Place a transportation ad in the category if you need t picked up and delivered. I can get a hot shot take it to Heights...

Read more

Complete Heater System For 1960 Plymouth

300.00 Dollar US$

 May 31, 2020

 Beasley

Complete Heater System For 1960 Plymouth

Complete Soup to Nuts. Dash vents, push button control, vacuum hostess, outside unit, inside unit, core, Hester control valve, switch plate and wiring. Pulled out of a low mileage 60. Plymouth that's been converted to race car. Great for putting into a heater delete car, repair a bad one or even install heat into a Kustom or Rat Rod. $300 +$80 to ship in lower 48

Read more

15" Wire Spoke Hubcaps With Tethers - Excellent Co...

300.00 Dollar US$

 October 30, 2020

 Beasley

15" Wire Spoke Hubcaps With Tethers - Excellent Condition

This is a full set of wire rim hub caps which were options on 1971-1978 High End Mopars. They give the appearance of the wire spoke wheels. These were taken off a 1978 Diplomat in 1979 (before they had a single scratch) and put into storage for the last 41 years. No Dents or scratches. Singles in this condition pop up in the range of $85-$125 each - but near impossible to find a full set where all are nice. In addition to t...

Read more

NEW McLeon Steel 11" Mopar RB Flywheel

275.00 Dollar US$

 May 30, 2020

 Beasley

NEW McLeon Steel 11" Mopar RB Flywheel

My screwup is your savings. New 11” 30# 143 tooth steel 6-bolt flywheel for Mopar RB. I ordered this based on information given to me, but needed a 130 tooth. Summit sells for $344, plus tax, plus handling, plus heavy shipping. You can have this one for $275 and I’ll pay for the ride on the lower 48.

Read more

Pair of Fender Aprons for Early 60s Dodge and Plym...

250.00 Dollar US$

 May 30, 2020

 Beasley

Pair of Fender Aprons for Early 60s Dodge and Plymouth Full Size Cars

These inner fenders (aka splash guards or Aprons) came out of the 60 Plymouth Station Wagon that was built into a race car. It is my understanding that they will fit all Full size 60 Plymouth -- and most likely also fit all 1960-1962 Full size Plymouths and Dodges -- but verify that before buying. Please cross reference before buying to ensure it will fit your model.

Read more

318 EFI Motor from 1981 Imperial

250.00 Dollar US$

 September 10, 2020

 Beasley

318 EFI Motor from 1981 Imperial

I pulled this engine out of my 1981 Imperial in 1989 because the EFI was troublesome. I replaced it with a 380hp 360ci Mopar crate motor. This engine had 24000 miles when pulled, but has been sitting in a shed for 31 years. Don't expect to just drop it into a car and go. it should be completely gone through and freshened up. I'm selling dirt cheap for the 1st $250 cash - including the crate with wheels its mounted to.

Read more

Front Bumper to 1960 Plymouth Fury

250.00 Dollar US$

 October 14, 2020

 Beasley

Front Bumper to 1960 Plymouth Fury

Front Bumper from 1960 Plymouth. Missing the optional top, and so the mounting holes for it will need to be filled if you don't have one to mount. Bumper is incredibly straight except for a small dent needing to be hammered out. Selling cheap for $250 Cannot ship. I've been screwed every time I've shipped bumpers. I suggest getting a bid from Uship.com. If you are flexible on how quick you need it - someone going from my ar...

Read more

8.25" Rear Axle from 24K Mile 81 Imperial

250.00 Dollar US$

 October 15, 2020

 Beasley

8.25" Rear Axle from 24K Mile 81 Imperial

About 20 years ago I swapped this out of my 24K mile 81 Imperial and swapped in an 8.75. I've had it in my shed ever since. I want to say I'd just done a brake job just before I pulled it. If you have a Mopar A, F, M or J-Body with a 7.25" Axle - this would be a great upgrade. Also can be part of a Rat Rod build or even a homemade trailer. F/J/M axles are 53.34" wide flange to flange, perches 44.46. I can't ship, so it will...

Read more



Subcategories

search

Price

Subscribe to this search