Lower price first
Higher price first
15" Wire Spoke Hubcaps With Tethers - Excellent Co...
300.00 Dollar US$
This is a full set of wire rim hub caps which were options on 1971-1978 High End Mopars. They give the appearance of the wire spoke wheels. These were taken off a 1978 Diplomat in 1979 (before they had a single scratch) and put into storage for the last 41 years.
No Dents or scratches. Singles in this condition pop up in the range of $85-$125 each - but near impossible to find a full set where all are nice.
In addition to t...
Black Leather Seats for 2dr - Excellent Condition
1200.00 Dollar US$
These black leather power seats were from a near new totaled BMW 3-series Coupe. I was going to put in my Dodge Magnum, but went a different route.
I paid $1800 + shipping for them - but have no use and will quick sell for $1200.
They make an excellent comfort and appearance upgrade to any Muscle Car with black interior. Leather dye companies sell leather gloss, which permanently adjusts the gloss for the 60s & 70s styl...
Tilt/Cruise Late B Body Steering Column
175.00 Dollar US$
I pulled from my 78 Magnum when I converted to floor shift. I'm pretty sure they shared the Saginaw column with GM for tilt. If you're looking to add tilt to your Mopar or GM, this ought to be pretty easy to swap in. Comes with key lock
$175 + $75 to pack & ship in lower 48
NOS Edelbrock STR14 Intake Manifold W/ Cross Ram L...
2000.00 Dollar US$
Made of pure Unobtainium!
Made for 413/426/440 Mopar Wedges - RB blocks
You'll never see another new STR-14.
This Intake spent decades hanging on a shop wall. If you're putting a Mopar RB motor in a Hot Rod, go retro with this intake and a pair of 4-barrels - and you'll be the hit of any car show.
I'll be a sport and pay for the ride.
NEW McLeon Steel 11" Mopar RB Flywheel
275.00 Dollar US$
My screwup is your savings. New 11” 30# 143 tooth steel 6-bolt flywheel for Mopar RB. I ordered this based on information given to me, but needed a 130 tooth. Summit sells for $344, plus tax, plus handling, plus heavy shipping. You can have this one for $275 and I’ll pay for the ride on the lower 48.
8.25" Rear Axle from 24K Mile 81 Imperial
250.00 Dollar US$
About 20 years ago I swapped this out of my 24K mile 81 Imperial and swapped in an 8.75. I've had it in my shed ever since. I want to say I'd just done a brake job just before I pulled it.
If you have a Mopar A, F, M or J-Body with a 7.25" Axle - this would be a great upgrade. Also can be part of a Rat Rod build or even a homemade trailer.
F/J/M axles are 53.34" wide flange to flange, perches 44.46.
I can't ship, so it will...
8.75" rear end from 1960 Plymouth
500.00 Dollar US$
8.75" pulled from a 1960 Plymouth Fury. The 3rd member is a 657 - similar to 742. 60.625" backing plate to backing plate and 45.5" perch to perch.
One legged with a highway gear. Performed flawlessly when pulled.
It can be picked up weekdays 8:30-3:30 from my shop in Beasley Texas. If you need shipped - I suggest getting a bid from Uship.com
Front Bumper to 1960 Plymouth Fury
250.00 Dollar US$
Front Bumper from 1960 Plymouth. Missing the optional top, and so the mounting holes for it will need to be filled if you don't have one to mount. Bumper is incredibly straight except for a small dent needing to be hammered out.
Selling cheap for $250
Cannot ship. I've been screwed every time I've shipped bumpers. I suggest getting a bid from Uship.com. If you are flexible on how quick you need it - someone going from my ar...
318 EFI Motor from 1981 Imperial
250.00 Dollar US$
September 10, 2020
I pulled this engine out of my 1981 Imperial in 1989 because the EFI was troublesome. I replaced it with a 380hp 360ci Mopar crate motor. This engine had 24000 miles when pulled, but has been sitting in a shed for 31 years. Don't expect to just drop it into a car and go. it should be completely gone through and freshened up. I'm selling dirt cheap for the 1st $250 cash - including the crate with wheels its mounted to.
Hitch Mount 3 Bike Carrier
25.00 Dollar US$
Fits into a standard hitch receiver and carries up to 3 bikes. Pick up in Beasley $25 cash
Late 60s and Early 70S Olds Valve Covers 330/400/4...
50.00 Dollar US$
Set of used valve covers off the 455 Olds motor in my 46 Olds Street Rod. I believe the motor was a 71, but can't swear to it. I replaced with after market valve covers They appear to be in great shape and motor never leak from them.
$25 shipping to lower 48.
Street Rod / Kustom Steering Column and Wheel (Old...
650.00 Dollar US$
Perfect addition to your Street Rod. Painted in a heavy Pearl metallic Red (Cadillac color) that my cost was over $1000 gallon. Super Deep Dish Olds steering wheel from late fifties of early sixties, on shifter column from early 70s Olds.
I've converted my 46 Olds Street Rod to floor shift and installed a tilt floor shift column with banjo wheel.
Too much of a hassle to disassemble and ship, so I'm making this a sweet deal w...
Complete Heater System For 1960 Plymouth
300.00 Dollar US$
Complete Soup to Nuts. Dash vents, push button control, vacuum hostess, outside unit, inside unit, core, Hester control valve, switch plate and wiring. Pulled out of a low mileage 60. Plymouth that's been converted to race car.
Great for putting into a heater delete car, repair a bad one or even install heat into a Kustom or Rat Rod.
$300 +$80 to ship in lower 48
Dash panel for a 78-79 Dodge Magnum GT or 79 Chrys...
75.00 Dollar US$
I think this works in any any 75-79 B-Body.
Wrap in carbon fiber, exotic wood veneer, hammertone metal (what I did), brushed aluminum skin or ?? and fill with aftermarket gauges to update the look.
$75 plus $25 to pack &ship
Flipup License Plate Bracket 1965 Dodge Coronet
35.00 Dollar US$
This came off a 1965 Dodge Coronet, but I'd be shocked if it didn't fit all B Bodies of that era. Flips up to allow access to gas tank filler. Shipped Medium Priority Mail box - or pick up at my shop in Beasley, TX. In Excellent Used Condition Shipped in Medium Priority Box for $17